It is an application for remote control of YAESU transceiver of the good old days. Compatible models are YAESU FT-757SXII / FT-757GXII / FT-840 / FT-850 (FT-890) / FT-900. The main functions are frequency (band) and mode switching, and various memories. The "frequency database function" was added in version 3.0. Version 4.0 now supports wireless control via Bluetooth. *Since a free version is available, please check the operation with the free version first. The free version has ads displayed at the bottom of the screen and some functions are limited.
Operating environment ・7-inch or larger tablet (USB-OTG required) It can be used on smartphones with high screen resolution, but it may be difficult to use. ・Control by USB (OTG)
Interface notes (must read!) ・USB connection example Tablet → USB (OTG) adapter → USB cable → USB conversion adapter → FT-X *It will not work with a USB adapter that does not support OTG. *The built-in device of the USB conversion adapter only supports FTDI. Other devices such as PL2303 and CH340 will not work properly. ・ Bluetooth connection example Tablet → (radio wave) → Bluetooth adapter → FT-X * The Bluetooth adapter operates with SPP specifications. * The serial communication baud rate of the Bluetooth adapter is required to be 4800bps.
※Precautions Please register HOME frequency by yourself after the first activation. (HOME frequency can be registered in all bands) Please note that this application does not synchronize with the FT main unit, so there may be differences in the settings of the FT-X and the application depending on how it is used. Since this application includes elements such as conversion cables other than the application, we cannot support it if it does not work well. We apologize for the inconvenience, but use it at your own discretion and responsibility.
How to use -Connect the smartphone (tablet) and FT with a cable. ・4800 baud rate is selected (4800 fixed) ・Touch the Connect button. If the connection is successful, the FT frequency will be displayed. ・Touch each band button to confirm that it switches. ・Touch the frequency display area to directly set the frequency numerically. (If you want to cancel, touch the frequency display part) ・Frequently used frequencies can be registered in all bands as HOME frequencies by pressing and holding the HOME button ・The frequency can be changed continuously by sliding the seek bar at the bottom of the frequency display to the left or right. ・Press and hold the M01 to M06 buttons to register in the memory. ・To delete the memory contents, check Delete and press and hold each memory button. ・Touch the Memo button to register the currently displayed frequency and mode in the history memory. (History memory can store up to 50 frequencies and modes) ・If Auto is checked, the set frequency is automatically stored in the history memory. ・ Touch Back to go back to the past in the history memory, and touch Next to go backward. ・Press and hold the Memo button to change the band button to the direct selection button in the history memory and select frequencies up to the past 16 (touch the frequency display to cancel)
